Introduction Of Drum (Learning tool)


Article 01      

                                                     Introduction of Drum



Gata beraya known as Kandyan Bera traditionally been used in the Kandyan (up country) dance. Figure 1 show parts of the drum.



1    Urapota
2    Kapumhama
3    Bera Kanda
4    Wam Asa
5    Dakunu Asa
6    Kanwaraya
7    Weniwara Karalla
8    Warapata

There are two sides of the drum called Wam asa and Dakunu asa. Right side (Dakuny asa) of the drum is covered with the skin of a Monkey while the opening on the other side (Wam asa) is covered with a Cattle skin. For this reason, there are different sounds from each other. Figure 2  shows one side of the drum.

                                                                     Figure 2

There are five basic lessons to learn called basic acres "Thath" ,"Jith", "Thon","Nan","Tha" for beginners. "Jith" and "Nan"  lessons and sounds from the right side of the drum and "Thath", "Thon" and  "Tha" lessons and sounds from the left side of the drum.

 Three ways to play the drum called Madya Laya, Drutha Laya and Thutha Laya Respectively low speed, normal speed and high speed.

sounds of drum
References

Author: Ishani Kaushalya

Comments

  1. AnonymousFebruary 3, 2022 at 12:49 AM

    ffx vs ffx vs ffx vs ffx vs ffx vs ffx vs ffx vs ffx
    ffx vs ffx vs ffx vs ffx vs ffx vs ffx vs ffx vs ffx vs ffx youtube to mp3 downloader vs ffx vs ffx vs ffx vs ffx vs ffx vs ffx vs ffx vs ffx vs ffx vs ffx vs ffx vs ffx vs ffx

    ReplyDelete

Post a Comment

Popular posts from this blog

Signal Processing - Nyquist Sampling Theorem

Image
Nyquist Sampling Theorem A continuous time signal can be represented in its samples and can be recovered back when sampling frequency f s  is greater than or equal to the twice the highest frequency component of message signal. fs ≥2 fm The Nyquist Theorem, also known as the sampling theorem, is a principle that engineers follow in the digitization of analog signals. For analog-to-digital conversion (A DC ) slices, called  samples , of the analog w aveform  must be taken frequently. The number of samples per second is called the sampling rate or sampling frequency. As tube amplifiers give a more pleasant mutation and compression to musical signals than transistors, analog tape similarly warms up and fattens the sound. Though, it is not needed to refrain from the other different uses of it. Other techniques such as tube compressors, to fatten the sound if needed.  there is no such thing as the  perfect low-pass filter  required by Nyquist’s theorem. A real filt
Read more

Signal Processing - Digital Signal Processing

Digital signal processing (DSP) Digital signal processing (DSP) is concerned with representation of signals as numbers and processing of these sequences. DSP has fixed processing characteristics, i.e. they are independent of the external factors of the environment at that moment. No need of a realignment over a life time, component tolerance does not affect the system performances, and no adjustments needed during the time of process, an increase of 1bit in representation results in increasing 6 db, using of standard digital circuits for implementation and also more importantly, multiplexing which describes the same equipment can be shared between several signals are some major advantages of DSP. DSP is applied in different paths such as acoustic acquisition and presentation, signal coding and compression, machine synthesis of signals and also more importantly to the drum device which is to be produced by HEX, Digital sound synthesis. Furthermore there are four major ways
Read more